FiberOptic 7010
The FiberOptic 7010 cuts and removes the Kevlar material from fiber optic cables up to 4.5 mm (0.18″) in diameter, leaving a remaining length between 3 and 60 mm (0.12 and 2.36″).
Kevlar, used as a strength member, is very hard to cut with common tools such as scissors. The built-in vacuum system in the FiberOptic 7010 draws the Kevlar strands of the optical fiber wires into the cutting head and removes them precisely. A micro-pore filter disposes of the separated Kevlar, ensuring that no fibers reach the respiratory organs.The number of pneumatically initiated cutting strokes, activated hands-free by a foot pedal, can be adjusted to the thickness of the material. Upon releasing the foot pedal, the vacuum system automatically switches off.
Share this page
| Specification name | Specification value |
|---|---|
| Options | Vacuum cleaner |
| Wire outer diameter max. | 4.5 mm |
| Strip length min. | 3 mm |
| Strip length max. | 30 mm |
| Electrical connection | 100/115/230 VAC, 50/60 Hz, 1000 VA (vacuum system) |
| Compressed-air connection | 5-7 bar |
| Compressed-air quality | Dry, filtered (10 μm), oil-free |
| Weight | 3 kg |
| Dimensions/length | 600 mm |
| Dimensions/width | 75 mm |
| Dimensions/height | 130 mm |
| Temperature operation | 5 – 40 °C |
| Processing outside the specifications | Processing outside the specifications upon request. In case of doubt, we will be happy to provide processing samples for your wires. |
| Cycle time | 3 sec |
| Cycle time depending on | depending on cross-section, strip length and pull-off length |
| User interface | manual |
| Trigger | Foot pedal |
| CE conformity | The FiberOptic 7010 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility. |
Brochure
