Kappa 330
- High Performance
- Simple, flexible operation with touch interface
- Innovative sensors to aid in setup and monitor processing
- Minima wire loss thanks to sensor monitoring
- Simple integration of delivery and deposit equipment
- TopWin interface
- Networking in company network
Share this page
Kappa 330 SH Kappa 330 DH
| Wire cross-section, stranded wires* | 0.22 – 35 mm² AWG24 – 2 | 0.22 – 35 mm² AWG24 – 2 |
|---|---|---|
| Max. outside diameter | 16 mm (0.63 in.) | 16 mm (0.63 in.) |
| Length accuracy | Repeat accuracy ±(0.2%+1 mm (0.04 in.)) |
Repeat accuracy ±(0.2%+1 mm (0.04 in.)) |
| Flat wire processing | Optional 40 mm (1.6 in.) | Optional 40 mm (1.6 in.) |
| Wire length range | ||
| Max. wire transport speed | 4.0 m/s (157.5 in./s) | 4.0 m/s (157.5 in./s) |
| Max. stripping lengths, full strip | Side 1: 180 mm (7.09 in.) Side 2: 50 mm (1.97 in.) |
Seite 1: 180 mm (7.09 in.) Seite 2: 50 mm (1.97 in.) |
| Max. stripping lengths, partial strip | Side 1: 999.9 mm (39.37 in.) Side 2: 999.9 mm (39.37 in.) |
Side 1: 999.9 mm (39.37 in.) Side 2: 999.9 mm (39.37 in.) |
| Max. stripping lengths, semi strip | Side 1: 999.9 mm (39.37 in.) Side 2: 999.9 mm (39.37 in.) |
Side 1: 999.9 mm (39.37 in.) Side 2: 999.9 mm (39.37 in.) |
| Intermediate stripping | Programmable (no limitations in terms of number and length) |
Programmable Programmable (no limitations in terms of number and length) |
| Optional inner conductor separation | No | Yes |
| Upgrade to dual head | Yes | |
| Optional fully programmable slitting module | Yes | Yes |
| Automatic conductor detector (Conductor detector) (automatic detection of cut depth) |
Optional | Optional |
| Cable detector (Cable detector) (queue, end and slip monitoring, zero- cut optimization, outside diameter measurement) |
Optional | Optional |
| Wire end detection | – | – |
| Length cut system | Optional | Optional |
| Straightening unit | Optional (external) | Optional (external) |
| IOCS interface (expandable) | 3 (6) | 3 (6) |
| USB/ethernet | Standard | Standard |
| Noise level | <70 dBA | <70 dBA |
| Production table | Optional | Optional |
| Electrical connection | 110/230 VAC ±10% 50/60 Hz 520 VA |
110/230 VAC ±10% 50/60 Hz 520 VA |
| Pneumatic connection | 5–8 bar (73–116 psi) | 5–8 bar (73–116 psi) |
| Dimensions (W×H×D) | 650×380×690 mm (25.6×15×27.2 in.) |
650×380×690 mm (25.6×15×27.2 in.) |
| Weight | approx. 55 kg (121.2 lb) | approx. 60 kg (132.3 lb) |
* Kappa machines can process many conductors outside the indicated cross-section range, but certain extremely hard, tough wires may not be able to be processed, even if they are within the indicated crosssection range. If in doubt, we are happy to provide you with samples of your wires.
Brochure
